In stock
Only 100 left

HikVision DS-K1T671TM-3XF Ultra Face Recognition Terminals integrated with temperature screening function.


DS-K1T671TM-3XF face recognition terminal is a kind of access control device integrated with temperature screening function. It can fast taking skin-surface temperature and upload abnormal temperature event to the center, which can be widely applied in multiple scenarios, such as
enterprises, stations, dwellings, factories, schools, campus and so on.

Can be combined with HikVision Video intercom station

Can be combined with CTIAI Foot pedal operated hand sanitizer stand   










  • Supports Vanadium Oxide uncooled sensor to measure target's temperature
  • Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: ± 0.5 °C
  • Recognition distance: 0.5 to 1.5 m
  • Fast temperature measurement mode: Detects face and takes temperature without identity authentication
  • Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature, etc
  • Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
  • Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
  • Displays temperature measurement results on the authentication page
  • Triggers voice prompt when detecting abnormal temperature
  • Configurable door status (open/close) when detecting abnormal temperature
  • Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data on the client software
  • Face recognition duration < 0.2 s/User; face recognition accuracy rate ≥ 99%
  • 50,000 face capacity, 50,000 card capacity, and 100,000 event capacity
  • Suggested height for face recognition: between 1.4 m and 1.9 m
  • Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
  • Watchdog design and tamper function
  • Audio prompt for authentication result
  • NTP, manually time synchronization, and auto synchronization
  • Connects to external access controller or Wiegand card reader via Wiegand protocol
  • Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
  • Imports and export data to the device from the client software
  • * Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes.
  • * In order to get an accurate temperature, after the device is powered on, you should wait for 90 min to warm the device up.


Temperature Measurement

  • Temperature Range30 °C to 45 °C (86 °F to 113 °F)
  • SensorVanadium Oxide uncooled sensor
  • Resolution120 × 160
  • Frame Rate25 fps
  • Accuracy± 0.5 °C, without black body calibration
  • Measuring Distance0.5 to 1.5 m


  • Size7-inch
  • TypeTouch screen
  • Operation MethodTouch screen


  • Pixel2 MP
  • LensDual-lens


  • Wired NetworkSupport, 10/100/1000 Mbps self-adaptive


  • Network Interface1
  • Lock Output1
  • Exit Button1
  • Door Contact Input1


  • Card TypeMifare 1 card


  • Face Anti-SpoofingSupport
  • Audio PromptSupport


  • Working Temperature0 °C to 50 °C (32 °F to 122 °F) For temperature measurement: 10 °C to 35 °C (50 °F to 95 °F)
  • Working Humidity10 to 90% (No condensing)
  • Application EnvironmentIndoor
More Information
Manufacturer HikVision
Product Type Thermal Handhelds & Terminals


Default Category

To Top